Arctis Nova Pro Wireless ChatMix on Linux

In this document

1. About this project
2. Disclaimer
3. My Findings
4. Usage
5. What's Next
6. License

About this project

Some SteelSeries headsets have a feature called ChatMix where you can easily adjust game and chat audio volume on the headphones or dongle.

In previous SteelSeries headsets ChatMix was always a hardware feature. It worked by providing 2 sound devices to the host, 1 for general audio and the other for chat audio.

In newer generations of their headsets however, in particular the Arctis Nova Pro Wireless, this feature was taken out of the hardware itself, and made into a feature of their audio software called Sonar.

Sonar of course only works on Windows (and requires a SteelSeries account!), so everyone using other platforms were shit out of luck, even though these headphones are far from cheap.

Even though it is now a software feature, the hardware can still control it, but only when Sonar activated this feature on the base station. You can toggle between normal volume controls and ChatMix by pressing down on the volume dial on either the headset or base station.

I used ChatMix a lot on my previous SteelSeries headset, and I want to be able to use it on this one, so I started looking into how I can control 2 virtual PipeWire sinks with the ChatMix controls. This project is the result.

Disclaimer

THIS PROJECT HAS NO ASSOCIATION TO STEELSERIES, NOR IS IT IN ANY WAY SUPPORTED BY THEM.

I AM NOT RESPONSIBLE FOR BRICKED/BROKEN DEVICES NOR DO I GUARANTEE IT WILL WORK FOR YOU.

USING ANYTHING IN THIS PROJECT MIGHT VOID YOUR WARRANTY AND IS AT YOUR OWN RISK

I started this project knowing nothing about USB (I still don't), so I might be overcomplicating everything. The scripts I created were quickly thrown together and don't really integrate with anything. I might try to improve this later, but I also might not, as it does work for me in it's current state.

My findings

I started by installing SteelSeries GG and Sonar in a Windows 11 VM and passing through the base station USB device. On the (Linux) host I used Wireshark to see what happened when I enabled Sonar.

This device uses USB HID events to both configure and receive data from the base station. I identified which ones enabled what features and tried activating these on Linux using the /dev/hidraw* device. See commands.sh for more information.

I am on MCU firmware version 01.29.27 and DSP firmware version 00.03.82.

Protocol description

Again, I don't really know anything about USB, so I could be wrong about a lot of this, but this is the protocol as I understand it

See nova.py for a commented example implementation.

The controls and data output are on USB Interface 4 (bInterfaceNumber=4). This interface has 2 endpoint, 1 for sending data (0x04) and 1 for receiving data (0x84).

The HID Data messages are structured as follows:

• The first byte decides wether we are sending or receiving. 0x6 means we sent it, 0x7 means we received it from the base station
• The second byte specifies the parameter, eg. 73 (0x49) to enable ChatMix
• The next bytes contain the value for that parameter, some parameters use 1 byte, some use more.
• Because the message should be 64 bytes long, the unused bytes should all be 0

These are the parameters I have found:
(There are quite a few more parameters, like sidetone and other settings, I just haven't documented those yet.)

Option	Description	Parameters	Range	Notes
73	ChatMix State	- Boolean: State	0-1
141	Sonar Icon State	- Boolean: State	0-1	I think this only toggles the icon, but that could be wrong
37	Volume Attenuation	- Integer: Attenuation	0-56	0=max 56=mute
69	ChatMix Controls	- Integer: Game Volume - Integer: Chat Volume	0-100
46	EQ Preset	- Integer: Preset	0-18	Preset 4 is the custom EQ profile
49	Custom EQ Controls	- Integer: EQ Bar - Integer: Value	0-40	On the base station the value ranges from -20 to 20

Usage

For this project I created a simple Python program to both enable the controls and use them to control 2 virtual sound devices.

Dependencies

• Python 3 (I used 3.12, it may or may not work on older versions)
• PyUSB
• PipeWire
• pactl

On Fedora 39 (assuming PipeWire is already setup) these can be installed with:

sudo dnf install pulseaudio-utils python3 python3-pyusb

To be able to run the script as a non-root user, some udev rules need to be applied. This will allow regular users to access the base station USB device.

Copy 50-nova-pro-wireless.rules to /etc/udev/rules.d and reload udev rules:

sudo cp 50-nova-pro-wireless.rules /etc/udev/rules.d/

sudo udevadm control --reload-rules
sudo udevadm trigger

You can now run the python script to use ChatMix. This will create 2 virtual sound devices:

• NovaGame for game/general audio
• NovaChat for chat audio

python nova.py

This command does not generate any output, but the Sonar icon should now be visible on the base station.

To use ChatMix select NovaGame as your main audio output, and select NovaChat as the output in your voice chat software of choice.

ChatMix should now work. You can toggle between volume and ChatMix by pressing the dial.

Use as a library

You should also be able to use nova.py as a library.
Example:

from nova import NovaProWireless

nova = NovaProWireless()
nova.enable_sonar_icon()
nova.enable_chatmix()

# Output all received messages
nova.print_output(True)

What's Next

Currently none of this is very polished, it should work, but that's about it. I would like to make this a bit more integrated, so that it just works without having to run the python script every time.

There are also some other projects that try to make headset features work on linux, for example HeadsetControl. I might want to try and get some of this implemented in there.

I also want to figure out if this could be something that happens by default in PipeWire (or somewhere else). So that users of the headset don't need anything beside what already comes with their distribution.

While I'd like to do these things, I don't yet know if I will. Even in the current state of the project, it does work for me, so while I'd like for this to be a temporary solution, it might just stay like this.

If anyone else wants to work on these things, please do, I'd love to see it.

License

This project is licensed under the EUROPEAN UNION PUBLIC LICENSE v. 1.2 (EUPL)